Tar is basically a
black and a thick substance that basically clings and sticks to nearly all the
things that it touches and it is actually unfortunate for the tile floors. Tar
an easily be removed and eradicated with the help of the special tools and
equipment’s, as well as with the expert cleaning compounds or with the heavy labor,
if it is accidentally traced or tracked in the house. Tar is actually dissolved
with the help of oils, thus, most of the oily substances and ingredients that
consist of peanut butter, so it may help to eradicate it. You need to determine
the kind of the tile first, then, you are going to know about the required
supplies.
Following is the method of how to remove tar from tile.
Procedure:
Material
Required:
·
Petroleum jelly
·
A sandwich bag
·
Ice
·
A wooden spatula
·
A cloth
·
WD-40
·
White vinegar
·
Glycerin or linseed oil
·
Mineral spirits
·
Scouring powder
Stages to Remove
the Tar from tile:
1. Petroleum jelly is used in order to wipe down on the spot
whether it is dry or old. And then, allow the petroleum jelly to soak down for
around half an hour or for 30 minutes. Before starting the cleaning process, with
the help of the petroleum jelly the spot is going to become soft.
2.
In case, if the tar or asphalt is thick or fresh, a bag of
sandwich is filled with the ice and the bag is laid all over the asphalt or tar
that is going to help it in order to solidify it more rapidly. The frozen tar
or asphalt is chipped off with the help of a wooden spatula.
3.
In case, if the mark of the tar is very thin and small,
then, a clean cloth is taken and it is sprayed with the WD-40. And the stain or
the mark of tar is rubbed away by using this sprayed cloth.
4. White vinegar can also be used with some drops of the linseed
oil or liquid vegetable glycerin in case, if WD-40 is not available. A clean
cloth is taken and the cleaner is applied to it and the stain is rubbed away with
using that cloth.
5.
A small mark of the tar is also removed by using another
cleaner that is mineral spirits. Make sure to spot test it first as it is used
in order to damage the seal on the tiles. In case, if it is safe, then, the
cloth is dampened with the help of the solvent and the stain is rubbed away by
using this.
6. When the bulk of the tar is removed, then, scouring powder
is used, for instance, Bar Keeper’s Friend, in order to eradicate the left over
residue.
No comments:
Post a Comment